Allied Telesis AlliedWare Plus - Chapter 1 CLI Navigation Commands; Introduction

1
C613-50100-01 REV C Command Reference for x930 Series 103
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
CLI Navigation
Commands
Introduction
Overview This chapter provides an alphabetical reference for the commands used to
navigate between different modes. This chapter also provides a reference for the
help and show commands used to help navigate within the CLI.
Command List •“configure terminal” on page 104
•“disable (Privileged Exec mode)” on page 105
•“do” on page 106
•“enable (Privileged Exec mode)” on page 107
•“end” on page 109
•“exit” on page 110
•“help” on page 111
•“logout” on page 112
•“show history” on page 113