C613-50100-01 REV C Command Reference for x930 Series 2518
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
ETHERNET PROTECTION SWITCHED RING (EPSRING™) COMMANDS
EPSR
TRAP
epsr trap
Overview This command enables SNMP traps for an EPSR instance. The traps will be sent
when the EPSR instance changes state.
The no variant of this command disables SNMP traps for an EPSR instance. The
traps will no longer be sent when the EPSR instance changes state.
Syntax
epsr <epsr-instance> trap
no epsr <epsr-instance> trap
Mode EPSR Configuration
Example To enable traps for the EPSR instance called blue, use the command:
awplus(config-epsr)# epsr blue trap
To disable traps for the EPSR instance called blue, use the command:
awplus(config-epsr)# no epsr blue trap
Related
Commands
epsr mode master controlvlan primary port
epsr mode transit controlvlan
show epsr
Parameter Description
<epsr-instance> Name of the EPSR instance.
trap SNMP trap for the EPSR instance.
To Next Page
Loading...
Need help?
General
