42
C613-50100-01 REV C Command Reference for x930 Series 2051
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
802.1X Commands
Introduction
Overview This chapter provides an alphabetical reference of commands used to configure
802.1X port access control. For more information, see the AAA and Port
Authentication Feature Overview and Configuration Guide
Command List •“dot1x accounting” on page 2053
•“dot1x authentication” on page 2054
•“debug dot1x” on page 2055
•“dot1x control-direction” on page 2056
•“dot1x eap” on page 2058
•“dot1x eapol-version” on page 2059
•“dot1x initialize interface” on page 2061
•“dot1x initialize supplicant” on page 2062
•“dot1x keytransmit” on page 2063
•“dot1x max-auth-fail” on page 2064
•“dot1x max-reauth-req” on page 2066
•“dot1x port-control” on page 2068
•“dot1x timeout tx-period” on page 2070
•“show debugging dot1x” on page 2072
•“show dot1x” on page 2073
•“show dot1x diagnostics” on page 2076
•“show dot1x interface” on page 2078
•“show dot1x sessionstatistics” on page 2083
•“show dot1x statistics interface” on page 2084
To Next Page
Loading...
Need help?
General
