C613-50100-01 REV C Command Reference for x930 Series 269
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
SYSTEM CONFIGURATION AND MONITORING COMMANDS
SHOW
ECOFRIENDLY
show ecofriendly
Overview This command displays the switch’s eco-friendly configuration status. The
ecofriendly led and ecofriendly lpi configuration status are shown in the show
ecofriendly output.
Syntax
show ecofriendly
Mode Privileged Exec and Global Configuration
Example To display the switch’s eco-friendly configuration status, use the following
command:
awplus# show ecofriendly
Output Figure 7-6: Example output from the show ecofriendly command
awplus#show ecofriendly
Front panel port LEDs normal
Energy efficient ethernet
Port Name Configured Status
port1.0.1 Port 1 lpi lpi
port1.0.2 lpi lpi
port1.0.3 lpi lpi
port1.0.4 off off
port1.0.5 lpi off
port1.0.6 Port 6 off off
port1.0.7 off -
port1.0.8 off -
port1.0.9 off -
port1.0.10 off -
...
Table 3: Parameters in the output of the show ecofriendly command
Parameter Description
normal The eco-friendly LED feature is disabled and port LEDs
show the current state of the ports. This is the default
setting.
off The eco-friendly LED feature is enabled and power to
the port LEDs is disabled.
Port Displays the port number as assigned by the switch.
Name Displays the port name if a name is configured for a
port number.
To Next Page
Loading...
Need help?
General
