C613-50100-01 REV C Command Reference for x930 Series 2752
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
DYNAMIC HOST CONFIGURATION PROTOCOL (DHCP) COMMANDS
SHOW
IP DHCP SERVER SUMMARY
show ip dhcp server summary
Overview This command shows the current configuration of the DHCP server. This includes:
• whether the DHCP server is enabled
• whether the DHCP server is configured to ignore BOOTP requests
• whether the DHCP server is configured to support DHCP lease queries
• the details of any user-defined options
• a list of the names of all DHCP address pools currently configured
This show command does not include any configuration details of the address
pools. You can display these using the show ip dhcp pool command.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Syntax
show ip dhcp server summary
Mode User Exec and Privileged Exec
Example To display the current configuration of the DHCP server, use the command:
awplus# show ip dhcp server summary
Output Figure 55-12: Example output from the show ip dhcp server summary
command
Related
Commands
ip dhcp leasequery enable
ip dhcp pool
service dhcp-server
DHCP Server service is disabled
BOOTP ignore is disabled
DHCP leasequery support is disabled
Pool list: p2
To Next Page
Loading...
Need help?
General
