C613-50100-01 REV C Command Reference for x930 Series 2551
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
ALLIED TELESIS MANAGEMENT FRAMEWORK™ (AMF) COMMANDS
ATMF
BACKUP GUESTS NOW
atmf backup guests now
Overview This command manually triggers an AMF backup of guest nodes on a AMF Master.
Syntax
atmf backup guests now [<node-name>] [<guest-port>]
Default N/A
Mode Privileged Exec
Example Use the following command to manually trigger the backup of all guests in the
AMF network
awplus# atmf backup guests now
Example To manually trigger the backup of a guest node connected to port 1.0.23 of node1,
use the following command:
awplus# atmf backup guests now node1 port1.0.23
Related
Commands
show atmf backup guest
Parameter Description
<node-name> The name of the guest’s parent node.
<guest-port> The port number that connects to the guest node.
To Next Page
Loading...
