Allied Telesis AlliedWare Plus - Show Arp Security Statistics

C613-50100-01 REV C Command Reference for x930 Series 2388
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
DHCP SNOOPING COMMANDS
SHOW
ARP SECURITY STATISTICS
show arp security statistics
Overview Use this command to display ARP security statistics for the specified ports or all
ports.
Syntax
show arp security statistics [detail] [interface <port-list>]
Mode User Exec and Privileged Exec
Example To display the brief statistics for the ARP security, use the command:
awplus# show arp security statistics
Parameter Description
detail Display detailed statistics.
interface <port-list> Display statistics for the specified ports.
Table 5: Example output from the show arp security statistics command
awplus# show arp security statistics

DHCP Snooping ARP Security Statistics:
In In
Interface Packets Discards
---------------------------------
port1.0.3 20 20
port1.0.4 30 30
port1.0.12 120 0
Table 6: Parameters in the output from the show arp security statistics
command
Parameter Description
Interface A port name. Parentheses indicate that ports are configured for
provisioning.
In Packets The total number of incoming ARP packets that are processed by
DHCP Snooping ARP Security
In
Discards
The total number of ARP packets that are dropped by DHCP Snooping
ARP Security.