C613-50100-01 REV C Command Reference for x930 Series 277
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
SYSTEM CONFIGURATION AND MONITORING COMMANDS
SHOW
MEMORY HISTORY
show memory history
Overview This command prints a graph showing the historical memory usage.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Syntax
show memory history [<stack-ID>]
Mode User Exec and Privileged Exec
Usage This command’s output displays three graphs of the percentage memory
utilization:
• per second for the last minute, then
• per minute for the last hour, then
• per 30 minutes for the last 30 hours.
Examples To show a graph displaying the historical memory usage for either a single
unstacked device, or a complete stack, use the command:
awplus# show memory history
To show a graph displaying the historical memory usage for specific stack member
(stack member 2 in this example) within a stack, use the command:
awplus# show memory history 2
Parameter Description
<stack-ID> Stack member number, from 1 to 8.
To Next Page
Loading...
Need help?
General
