3
C613-50100-01 REV C Command Reference for x930 Series 164
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
User Access
Commands
Introduction
Overview This chapter provides an alphabetical reference of commands used to configure
user access.
Command List •“clear line console” on page 166
•“clear line vty” on page 167
•“enable password” on page 168
•“enable secret” on page 171
•“exec-timeout” on page 174
•“flowcontrol hardware (asyn/console)” on page 176
•“length (asyn)” on page 178
•“line” on page 179
•“privilege level” on page 181
•“security-password history” on page 182
•“security-password forced-change” on page 183
•“security-password lifetime” on page 184
•“security-password minimum-categories” on page 185
•“security-password minimum-length” on page 186
•“security-password reject-expired-pwd” on page 187
•“security-password warning” on page 188
•“service advanced-vty” on page 189
•“service password-encryption” on page 190
•“service telnet” on page 191
•“service terminal-length (deleted)” on page 192
To Next Page
Loading...
Need help?
General
