C613-50100-01 REV C Command Reference for x930 Series 1670
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
MLD AND MLD SNOOPING COMMANDS
IPV
6 MLD SSM-MAP ENABLE
ipv6 mld ssm-map enable
Overview Use this command to enable the Source Specific Multicast (SSM) mapping feature
on the device.
Use the no variant of this command to disable the SSM mapping feature on the
device.
Syntax
ipv6 mld ssm-map enable
no ipv6 mld ssm-map enable
Mode Global Configuration
Usage This command enables the SSM mapping feature for group members in the
defined SSM range. Configure the group member and the SSM range using the
ipv6 mld ssm-map static command.
Example This example shows how to enable the MLD SSM mapping feature on the device.
awplus# configure terminal
awplus(config)# ipv6 mld ssm-map enable
Related
Commands
ipv6 mld ssm-map static
To Next Page
Loading...
Need help?
General
