C613-50100-01 REV C Command Reference for x930 Series 288
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
SYSTEM CONFIGURATION AND MONITORING COMMANDS
SHOW
SYSTEM
show system
Overview This command displays general system information about the device, including
the hardware, installed, memory, and software versions loaded. It also displays
location and contact details when these have been set.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Syntax
show system
Mode User Exec and Privileged Exec
Example To display configuration information, use the command:
awplus# show system
Output Figure 7-18: Example output from show system
Related
Commands
show system environment
awplus#show system
System Status Mon Nov 16 08:42:16 2015
Board ID Bay Board Name Rev Serial number
--------------------------------------------------------------------------------
Base 389 AT-x930-28GSTX A-0 000181A151300053
Expansion 417 Bay1 AT-FAN09ADP A-0 N/A
PSU 337 PSU1 PWR250 A-0 A212F506Z
PSU 337 PSU2 PWR250 A-0 A212F506D
--------------------------------------------------------------------------------
RAM: Total: 2007632 kB Free: 1786472 kB
Flash: 253.8MB Used: 35.8MB Available: 218.0MB
--------------------------------------------------------------------------------
Environment Status : Normal
Uptime : 3 days 22:20:06
Bootloader version : 3.1.3
Current software : x930-5.4.5-2.1.rel
Software version : 5.4.5-2.1
Build date : Thu Nov 12 12:11:29 NZDT 2015
Current boot config: flash:/backup.cfg (file exists)
System Name
awplus
System Contact
System Location
To Next Page
Loading...
Need help?
General
