Allied Telesis AlliedWare Plus User Manual

C613-50100-01 REV C Command Reference for x930 Series 701
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
GVRP COMMANDS
SHOW
GVRP MACHINE
show gvrp machine
Overview Use this command to display the state machine for GVRP.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Syntax
show gvrp machine
Mode User Exec and Privileged Exec
Example To show the GVRP state machine for the switch, enter the command:
awplus# show gvrp machine
Output See the following output of this command displaying the GVRP state machine.
awplus show gvrp machine
port = 1.0.1 applicant state = QA registrar state = INN
port = 1.0.2 applicant state = QA registrar state = INN

Allied Telesis AlliedWare Plus Specifications

General

Brand	Allied Telesis
Model	AlliedWare Plus
Category	Switch
Language	English