C613-50100-01 REV C Command Reference for x930 Series 2431
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
VIRTUAL CHASSIS STACKING (VCSTACK™) COMMANDS
REMOTE
-LOGIN
remote-login
Overview This command is used only on the master in order to log onto the CLI of another
stack member. In most respects the result of this is similar to being logged into the
stack master. Configuration commands are still applied to all stack members, but
show commands and commands that access the file system are executed locally.
The specific output obtained will vary greatly depending on the show command
chosen.
Syntax
remote-login <stack-ID>
Mode Privileged Exec
Usage Note that some commands such as ping or telnet are not available when the
remote-login is used.
Example To log onto stack member 2, use the following command:
awplus# remote-login 2
To return to the command prompt on the master stack member, type exit.
Parameter Description
<stack-ID> Stack member number, from 1 to 8.
To Next Page
Loading...
Need help?
General
