C613-50100-01 REV C Command Reference for x930 Series 1554
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
VRF LITE COMMANDS
SHOW
IP BGP PREFIX-LIST (BGP ONLY)
show ip bgp prefix-list (BGP only)
Overview Use this command to display routes matching the prefix-list within an IPv4
environment. Use the show bgp ipv6 prefix-list (BGP4+ only) command to display
routes matching the prefix-list within an IPv6 environment.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Syntax
show ip bgp prefix-list <list>
Syntax [VRF] show ip bgp [global|vrf <vrf-name>] prefix-list <list>
Mode User Exec and Privileged Exec
Examples
awplus# show ip bgp prefix-list mylist
awplus# show ip bgp vrf red prefix-list myPrefixes
Related
Commands
show bgp ipv6 prefix-list (BGP4+ only)
Parameter Description
global When VRF lite is configured, apply the command to the global
routing and forwarding table.
vrf Apply the command to the specified VRF instance.
<vrf-name> The name of the VRF instance.
<list> Specifies the name of the IP prefix list.
To Next Page
Loading...
Need help?
General
