C613-50100-01 REV C Command Reference for x930 Series 1820
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
PIM-SMV6 COMMANDS
SHOW
IPV6 PIM SPARSE-MODE RP-HASH
show ipv6 pim sparse-mode rp-hash
Overview Use this command to display the Rendezvous Point (RP) to be chosen based on the
IPv6 group address selected.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Syntax
show ipv6 pim sparse-mode rp-hash <IPv6-group-addr>
Mode User Exec and Privileged Exec
Example
awplus# show ipv6 pim sparse-mode rp-hash ff04:10
Figure 35-12: Output from the show ipv6 pim sparse-mode rp-hash command:
Related
commands
show ipv6 pim sparse-mode rp mapping
Parameter Description
<IPv6-group-addr> The IPv6 group address used to find the RP, entered in the
form X:X::X:X.
awplus#show ipv6 pim sparse-mode rp-hash ff04::10
RP: 3ffe:10:10:5::153
Info source: 3ffe:10:10:5::153, via bootstrap
To Next Page
Loading...
Need help?
General
