C613-50100-01 REV C Command Reference for x930 Series 2943
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
RMON COMMANDS
SHOW
RMON ALARM
show rmon alarm
Overview Use this command to display the alarms and threshold configured for the RMON
probe.
NOTE: Only the alarms for switch port interfaces, not for VLAN interfaces, can be
shown.
Syntax
show rmon alarm
Mode User Exec and Privileged Exec
Example To display the alarms and threshold, use this command:
awplus# show rmon alarm
Related
Commands
rmon alarm