C613-50100-01 REV C Command Reference for x930 Series 1034
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
OSPF COMMANDS
SHOW
IP OSPF DATABASE OPAQUE-AS
show ip ospf database opaque-as
Overview Use this command to display information about the link-state type 11 LSAs. This
type of link-state denotes that the LSA is flooded throughout the Autonomous
System (AS).
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Syntax
show ip ospf database opaque-as [<ip-address>]
[self-originate|<advrouter>]
Mode User Exec and Privileged Exec
Examples
awplus# show ip ospf database opaque-as 1.2.3.4 self-originate
awplus# show ip ospf database opaque-as self-originate
awplus# show ip ospf database opaque-as 1.2.3.4 adv-router
2.3.4.5
Output Figure 26-11: Example output from the show ip ospf database opaque-as
command
Parameter Description
<advrouter> adv-router <ip-address>
adv-router Displays all the LSAs of the specified router.
<ip-address> A link state ID, as an IP address.
self-originate Displays self-originated link states.
OSPF Router process 100 with ID (10.10.11.50)
AS-Global Opaque-LSA
LS age: 325
Options: 0x2 (*|-|-|-|-|-|E|-)
LS Type: AS-external Opaque-LSA
Link State ID: 11.10.9.23 (AS-external Opaque-Type/ID)
Opaque Type: 11
Opaque ID: 657687
Advertising Router: 10.10.11.50
LS Seq Number: 80000001
Checksum: 0xb018
Length: 25
To Next Page
Loading...
Need help?
General
