C613-50100-01 REV C Command Reference for x930 Series 973
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
OSPF COMMANDS
DEBUG
OSPF NSM
debug ospf nsm
Overview This command enables debugging options for the OSPF Network Service Module.
To enable both debugging options, specify debug ospf nsm with no additional
parameters.
The no and undebug variant of this command disable OSPF NSM debugging. Use
this command without parameters to disable both options.
Syntax
debug ospf nsm [interface] [redistribute]
no debug ospf nsm [interface] [redistribute]
Mode Priviledged Exec and Global Configuration
Examples
awplus# debug ospf nsm interface
awplus# no debug ospf nsm redistribute
awplus# undebug ospf nsm interface
Related
Commands
terminal monitor
undebug ospf nsm
Parameter Description
interface Specify NSM interface information.
redistribute Specify NSM redistribute information.
To Next Page
Loading...
Need help?
General
