C613-50100-01 REV C Command Reference for x930 Series 3034
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
TRIGGER COMMANDS
TYPE
STACK MEMBER
type stack member
Overview This command (configured to the stack) initiates the action of a pre-configured
trigger to occur when a device either joins or leaves the stack.
Syntax
type stack member {join|leave}
Mode Trigger Configuration
Example To configure a pre-configured trigger number 86 to activate when a new device
joins the stack.
Note that the number 86 has no particular significance: you can assign any
(previously created) numbered trigger.
awplus# configure terminal
awplus(config)# trigger 86
awplus(config-trigger)# type stack member join
Related
Commands
trigger
type stack master-fail
type stack link
Parameter Description
join Neighbor join event
leave Neighbor leave event
To Next Page
Loading...
