C613-50100-01 REV C Command Reference for x930 Series 1218
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
BGP AND BGP4+ COMMANDS
CLEAR
BGP IPV6 FLAP-STATISTICS (BGP4+ ONLY)
clear bgp ipv6 flap-statistics (BGP4+ only)
Overview Use this command to clear the flap count and history duration for the specified
prefixes.
Syntax
clear bgp ipv6 flap-statistics
[<ipv6-addr>|<ipv6-addr/prefix-length>]
Mode Privileged Exec
Examples
awplus# clear bgp ipv6 flap-statistics 2001:0db8:010d::1
awplus# clear bgp ipv6 flap-statistics 2001:0db8::/64
Parameter Description
<ipv6-addr> Specifies the IPv6 address for which BGP4+ flap count and
history duration are to be cleared, entered in hexadecimal in
the format X:X::X:X.
<ipv6-addr/
prefix-length>
Specifies the IPv6 address with prefix length for which BGP4+
flap count and history duration are to be cleared. The IPv6
address uses the format X:X::X:X/Prefix-Length. The
prefix-length is usually set between 0 and 64.
To Next Page
Loading...
