27
C613-50100-01 REV C Command Reference for x930 Series 1056
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
OSPFv3 for IPv6
Commands
Introduction
Overview This chapter provides an alphabetical reference of commands used to configure
OSPFv3 for IPv6. See the OSPFv3 Feature Overview and Configuration Guide for
more information and examples.
Command List •“abr-type” on page 1059
•“area authentication ipsec spi” on page 1060
•“area default-cost (IPv6 OSPF)” on page 1062
•“area encryption ipsec spi esp” on page 1063
•“area range (IPv6 OSPF)” on page 1066
•“area stub (IPv6 OSPF)” on page 1068
•“area virtual-link (IPv6 OSPF)” on page 1069
•“area virtual-link authentication ipsec spi” on page 1071
•“area virtual-link encryption ipsec spi” on page 1073
•“auto-cost reference bandwidth (IPv6 OSPF)” on page 1076
•“bandwidth” on page 1078
•“clear ipv6 ospf process” on page 1079
•“debug ipv6 ospf events” on page 1080
•“debug ipv6 ospf ifsm” on page 1081
•“debug ipv6 ospf lsa” on page 1082
•“debug ipv6 ospf nfsm” on page 1083
•“debug ipv6 ospf packet” on page 1084
•“debug ipv6 ospf route” on page 1085
•“default-information originate” on page 1086
To Next Page
Loading...
Need help?
General
