C613-50100-01 REV C Command Reference for x930 Series 654
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
LINK AGGREGATION COMMANDS
SHOW
LACP SYS-ID
show lacp sys-id
Overview Use this command to display the LACP system ID and priority.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide, which is
available on our website at alliedtelesis.com.
Syntax
show lacp sys-id
Mode User Exec and Privileged Exec
Example
awplus# show lacp sys-id
Output Example output from show lacp sys-id
System Priority: 0x8000 (32768)
MAC Address: 0200.0034.5684
To Next Page
Loading...
