C613-50100-01 REV C Command Reference for x930 Series 966
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
OSPF COMMANDS
CAPABILITY
RESTART
capability restart
Overview This command enables OSPF Graceful Restart or restart signaling features. By
default, this is enabled.
Use the no variant of this command to disable OSPF Graceful Restart and restart
signaling features.
Syntax
capability restart [graceful|signaling]
no capability restart
Default Graceful restart
Mode Router Configuration
Example
awplus# configure terminal
awplus(config)# router ospf 100
awplus(config-router)# capability restart graceful
Parameter Description
graceful Enable graceful OSPF restart.
signaling Enable OSPF restart signaling.
To Next Page
Loading...
Need help?
General
