C613-50100-01 REV C Command Reference for x930 Series 1688
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
MULTICAST COMMANDS
DEBUG
NSM MCAST6
debug nsm mcast6
Overview Use this command to debug IPv6 events in the Multicast Routing Information Base
(MRIB).
Syntax
debug nsm mcast6
{all|fib-msg|mrt|mtrace|mtrace-detail|register|stats|vif}
Mode Privileged Exec and Global Configuration
Examples
awplus# configure terminal
awplus(config)# debug nsm mcast6 all
awplus# configure terminal
awplus(config)# debug nsm mcast6 fib-msg
awplus# configure terminal
awplus(config)# debug nsm mcast6 mif
awplus# configure terminal
awplus(config)# debug nsm mcast6 mrt
awplus# configure terminal
awplus(config)# debug nsm mcast6 register
awplus# configure terminal
awplus(config)# debug nsm mcast6 stats
Parameter Description
all All IPv4 multicast debugging.
fib-msg Forwarding Information Base (FIB) messages.
mif Multicast interfaces.
mrt Multicast routes.
register Multicast PIM register messages.
stats Multicast statistics.
To Next Page
Loading...
Need help?
General
