Allied Telesis AlliedWare Plus - Show Mac Address-Table Thrash-Limit

C613-50100-01 REV C Command Reference for x930 Series 489
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
SWITCHING COMMANDS
SHOW
MAC ADDRESS-TABLE THRASH-LIMIT
show mac address-table thrash-limit
Overview Use this command to display the current thrash limit set for all interfaces on the
device.
Syntax
show mac address-table thrash-limit
Mode User Exec and Privileged Exec
Example To display the current, use the following command:
awplus# show mac address-table thrash-limit
Output Figure 14-6: Example output from the show mac address-table thrash-limit
command
Related
Commands
mac address-table thrash-limit
% Thrash-limit 7 movements per second