Allied Telesis AlliedWare Plus - Auth-Web-Server Ssl

C613-50100-01 REV C Command Reference for x930 Series 2177
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
AUTHENTICATION COMMANDS
AUTH
-WEB-SERVER SSL
auth-web-server ssl
Overview This command enables HTTPS functionality for the Web-Authentication server
feature.
Use the no variant of this command to disable HTTPS functionality for the
Web-Authentication server.
Syntax
auth-web-server ssl
no auth-web-server ssl
Default HTTPS functionality for the Web-Authentication server feature is disabled by
default.
Mode Global Configuration
Examples To enable HTTPS functionality for the Web-Authentication server feature, use the
following commands:
awplus# configure terminal
awplus(config)# auth-web-server ssl
To disable HTTPS functionality for the Web-Authentication server feature, use the
following commands:
awplus# configure terminal
awplus(config)# no auth-web-server ssl
Validation
Commands
show auth
show auth-web-server
show running-config