C613-50100-01 REV C Command Reference for x930 Series 2597
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
ALLIED TELESIS MANAGEMENT FRAMEWORK™ (AMF) COMMANDS
ATMF
RECOVER LED-OFF
atmf recover led-off
Overview This command turns off the recovery failure flashing port LEDs. It reverts the LED’s
function to their normal operational mode, and in doing so assists with resolving
the recovery problem. You can repeat this process until the recovery failure has
been resolved. For more information, see the AMF Feature Overview and
Configuration Guide.
Syntax
atmf recover led-off
Default Normal operational mode
Mode Privileged Exec
Example To revert the LEDs on Node1 from recovery mode display to their normal
operational mode, use the command:
Node1# atmf recover led-off
Related
Commands
atmf recover
To Next Page
Loading...
Need help?
General
