C613-50100-01 REV C Command Reference for x930 Series 1416
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
BGP AND BGP4+ COMMANDS
SHOW
IP BGP PATHS (BGP ONLY)
show ip bgp paths (BGP only)
Overview Use this command to display BGP4 path information within an IPv4 environment.
Use the show bgp ipv6 paths (BGP4+ only) command to display BGP4+ path
information within an IPv4 environment.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Syntax
show ip bgp paths
Mode User Exec and Privileged Exec
Example
awplus# show ip bgp paths
Related
Commands
show bgp ipv6 paths (BGP4+ only)
To Next Page
Loading...
Need help?
General
