Allied Telesis AlliedWare Plus - Mail Smtpserver

C613-50100-01 REV C Command Reference for x930 Series 2933
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
SMTP COMMANDS
MAIL
SMTPSERVER
mail smtpserver
Overview This command sets the IP address of the SMTP server that your device sends email
to. You must specify a mail server with this command before you can send any
email.
Syntax
mail smtpserver <ip-address>
Mode Global Configuration
Example To specify a mail server at 192.168.0.1, use the command:
awplus# mail smtpserver 192.168.0.1
Related
Commands
debug mail
delete mail
mail
mail from
show mail
show counter mail
Parameter Description
<ip-address> Internet Protocol (IP) Address for the mail server specified.