C613-50100-01 REV C Command Reference for x930 Series 2246
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
AAA COMMANDS
SHOW
AAA SERVER GROUP
show aaa server group
Overview Use this command to list AAA users and any method lists applied to them.
Syntax
show aaa server group
Mode Privileged Exec
Example To show the AAA configuration on a device, use the command:
awplus# aaa server group
Output Figure 44-2: Example output from aaa server group
Related
Commands
aaa accounting auth-web
aaa authentication auth-web
awplus#show aaa server group
User List Name Method Acct-Event
======== ==== ============= ================ ======= ==========
login auth default - local -
-------- ---- ------------- ---------------- ------- ----------
login acct - - - -
-------- ---- ------------- ---------------- ------- ----------
dot1x auth default radius group -
dot1x auth vlan30_auth rad_group_1 group -
dot1x auth vlan40_auth rad_group_2 group -
-------- ---- ------------- ---------------- ------- ----------
dot1x acct vlan30_acct rad_group_4 group start-stop
dot1x acct vlan40_acct rad_group_5 group start-stop
-------- ---- ------------- ---------------- ------- ----------
auth-mac auth default radius group -
auth-mac auth vlan10_auth rad_group_vlan10 group -
auth-mac auth vlan20_auth rad_group_vlan20 group -
-------- ---- ------------- ---------------- ------- ----------
auth-mac acct vlan10_acct rad_group_vlan10 group start-stop
auth-mac acct vlan20_acct rad_group_vlan20 group start-stop
-------- ---- ------------- ---------------- ------- ----------
auth-web auth default radius group -
-------- ---- ------------- ---------------- ------- ----------
auth-web acct default rad_group_3 group start-stop
-------- ---- ------------- ---------------- ------- ----------
To Next Page
Loading...
Need help?
General
