C613-50100-01 REV C Command Reference for x930 Series 894
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
RIP COMMANDS
KEY
-STRING
key-string
Overview Use this command to define the password to be used by a key.
Use the no variant of this command to remove a password.
Syntax
key-string <key-password>
no key-string
Mode Keychain-key Configuration
Usage Use this command to specify passwords for different keys.
Examples In the following example, the password for key1 in the key chain named
mychain is set to password prime:
awplus# configure terminal
awplus(config)# key chain mychain
awplus(config-keychain)# key 1
awplus(config-keychain-key)# key-string prime
In the following example, the password for key1 in the key chain named
mychain is removed:
awplus# configure terminal
awplus(config)# key chain mychain
awplus(config-keychain)# key 1
awplus(config-keychain-key)# no key-string
Related
Commands
key
key chain
accept-lifetime
send-lifetime
Parameter Description
<key-password> A string of characters to be used as a password by the key.
To Next Page
Loading...
Need help?
General
