C613-50100-01 REV C Command Reference for x930 Series 535
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
VLAN COMMANDS
SWITCHPORT
PRIVATE-VLAN HOST-ASSOCIATION
switchport private-vlan host-association
Overview Use this command to associate a primary VLAN and a secondary VLAN to a host
port. Only one primary and secondary VLAN can be associated to a host port.
Use the no variant of this command to remove the association.
Syntax
switchport private-vlan host-association <primary-vlan-id> add
<secondary-vlan-id>
no switchport private-vlan host-association
Mode Interface Configuration
Examples
awplus# configure terminal
awplus(config)# interface port1.0.2
awplus(config-if)# switchport private-vlan host-association 2
add 3
awplus# configure terminal
awplus(config)# interface port1.0.2
awplus(config-if)# no switchport private-vlan host-association
Parameter Description
<primary-vlan-id> VLAN ID of the primary VLAN.
<secondary-vlan-id> VLAN ID of the secondary VLAN (either isolated or com
munity).
To Next Page
Loading...
Need help?
General
