C613-50100-01 REV C Command Reference for x930 Series 226
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
GUI COMMANDS
SHOW
HTTP
show http
Overview This command shows the HTTP server settings.
Syntax
show http
Mode User Exec and Privileged Exec
Example To show the HTTP server settings, use the command:
awplus# show http
Output Figure 6-2: Example output from the show http command
Related
Commands
clear line vty
service http
awplus#show http
HTTP Server Configuration
------------------------------------------------------------
HTTP server : Enabled
Port : 80
To Next Page
Loading...
