C613-50100-01 REV C Command Reference for x930 Series 2922
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
LLDP COMMANDS
SHOW
LLDP STATISTICS
show lldp statistics
Overview This command displays the global LLDP statistics (packet and event counters).
Syntax
show lldp statistics
Mode User Exec and Privileged Exec
Example To display global LLDP statistics information, use the command:
awplus# show lldp statistics
Output
Table 62: Example output from the show lldp statistics command
awplus# show lldp statistics
Global LLDP Packet and Event counters:
Frames: Out ................... 345
In .................... 423
In Errored ............ 0
In Dropped ............ 0
TLVs: Unrecognized .......... 0
Discarded ............. 0
Neighbors: New Entries ........... 20
Deleted Entries ....... 20
Dropped Entries ....... 0
Entry Age-outs ........ 20
Table 63: Parameters in the output of the show lldp statistics command
Parameter Description
Frames Out Number of LLDPDU frames transmitted.
Frames In Number of LLDPDU frames received.
Frames In Errored Number of invalid LLDPDU frames received.
Frames In Dropped Number of LLDPDU frames received and discarded for any
reason.
TLVs
Unrecognized
Number of LLDP TLVs received that are not recognized but
the TLV type is in the range of reserved TLV types.
TLVs Discarded Number of LLDP TLVs discarded for any reason.
Neighbors New
Entries
Number of times the information advertised by neighbors
has been inserted into the neighbor table.
To Next Page
Loading...
Need help?
General
