26
C613-50100-01 REV C Command Reference for x930 Series 948
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
OSPF Commands
Introduction
Overview This chapter provides an alphabetical reference of commands used to configure
OSPF. For more information, see the OSPF Feature Overview and Configuration
Guide.
Command List •“area default-cost” on page 951
•“area authentication” on page 952
•“area filter-list” on page 953
•“area nssa” on page 954
•“area range” on page 956
•“area stub” on page 958
•“area virtual-link” on page 959
•“auto-cost reference bandwidth” on page 962
•“bandwidth” on page 964
•“capability opaque” on page 965
•“capability restart” on page 966
•“clear ip ospf process” on page 967
•“compatible rfc1583” on page 968
•“debug ospf events” on page 969
•“debug ospf ifsm” on page 970
•“debug ospf lsa” on page 971
•“debug ospf nfsm” on page 972
•“debug ospf nsm” on page 973
•“debug ospf packet” on page 974
To Next Page
Loading...
Need help?
General
