Allied Telesis AlliedWare Plus - Page 949

C613-50100-01 REV C Command Reference for x930 Series 949
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
OSPF COMMANDS
•“debug ospf route” on page 975
•“default-information originate” on page 976
•“default-metric (OSPF)” on page 977
•“distance (OSPF)” on page 978
•“distribute-list (OSPF)” on page 980
•“enable db-summary-opt” on page 983
•“host area” on page 984
•“ip ospf authentication” on page 985
•“ip ospf authentication-key” on page 986
•“ip ospf cost” on page 987
•“ip ospf database-filter” on page 988
•“ip ospf dead-interval” on page 989
•“ip ospf disable all” on page 990
•“ip ospf hello-interval” on page 991
•“ip ospf message-digest-key” on page 992
•“ip ospf mtu” on page 994
•“ip ospf mtu-ignore” on page 995
•“ip ospf network” on page 996
•“ip ospf priority” on page 997
•“ip ospf resync-timeout” on page 998
•“ip ospf retransmit-interval” on page 999
•“ip ospf transmit-delay” on page 1000
•“max-concurrent-dd” on page 1001
•“maximum-area” on page 1002
•“neighbor (OSPF)” on page 1003
•“network area” on page 1004
•“ospf abr-type” on page 1006
•“ospf restart grace-period” on page 1007
•“ospf restart helper” on page 1008
•“ospf router-id” on page 1010
•“overflow database” on page 1011
•“overflow database external” on page 1012
•“passive-interface (OSPF)” on page 1013
•“redistribute (OSPF)
” on page 1014
•“restart ospf graceful” on page 1016