C613-50100-01 REV C Command Reference for x930 Series 1393
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
BGP AND BGP4+ COMMANDS
SHOW
IP BGP ATTRIBUTE-INFO (BGP ONLY)
show ip bgp attribute-info (BGP only)
Overview Use this command to show internal attribute hash information.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Syntax
show ip bgp attribute-info
Mode User Exec and Privileged Exec
Example
awplus# show ip bgp attribute-info
Output Figure 28-8: Example output from the show ip bgp attribute-info command
attr[1] nexthop 0.0.0.0
attr[1] nexthop 10.10.10.10
attr[1] nexthop 10.10.10.50
To Next Page
Loading...
