C613-50100-01 REV C Command Reference for x930 Series 1377
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
BGP AND BGP4+ COMMANDS
SHOW
BGP IPV6 INCONSISTENT-AS (BGP4+ ONLY)
show bgp ipv6 inconsistent-as (BGP4+ only)
Overview Use this command to display routes with inconsistent AS Paths within an IPv6
environment. Use the show ip bgp inconsistent-as (BGP only) command to display
routes with inconsistent AS paths within an IPv4 environment.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Syntax
show bgp ipv6 inconsistent-as
Mode User Exec and Privileged Exec
Example
awplus# show bgp ipv6 inconsistent-as
Related
Commands
show ip bgp inconsistent-as (BGP only)
To Next Page
Loading...
