Allied Telesis AlliedWare Plus - Show Stack Detail

C613-50100-01 REV C Command Reference for x930 Series 2441
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
VIRTUAL CHASSIS STACKING (VCSTACK™) COMMANDS
SHOW
STACK DETAIL
show stack detail
Overview Use this command to display detailed information about current stack members.
Syntax
show stack detail
Mode User Exec and Privileged Exec
Usage This command displays detailed information about current stack members. See
show stack to display summary stack information only.
Example To display the detailed stacking information about the stack’s overall status:
awplus# show stack detail
Figure 51-6: Example output from show stack detail
Virtual Chassis Stacking detailed information

Stack Status:
----------------------------------------------------------------
Operational Status Normal operation
Management VLAN ID 4094
Management VLAN subnet address 192.168.255.0
Virtual Chassis ID 388 (0x184)
Virtual MAC address 0000.cd37.0184
Mixed mode Disabled
Disabled Master Monitoring Enabled
Stack member 1:
----------------------------------------------------------------
ID 1
Pending ID -
MAC address 0000.cd28.070d
Last role change Wed May 7 22:31:58 2013
Product type x610-24Ts/XP
Role Active Master
Priority 1
Host name awplus
S/W version auto synchronizaion On
Resiliency link status Configured
Stack port 1.0.1 status learned neighbor 2
Stack port 1.0.2 status learned neighbor 3