C613-50100-01 REV C Command Reference for x930 Series 265
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
SYSTEM CONFIGURATION AND MONITORING COMMANDS
SHOW
CPU HISTORY
show cpu history
Overview This command prints a graph showing the historical CPU utilization.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Syntax
show [<stack-ID>] cpu history
Mode User Exec and Privileged Exec
Usage This command’s output displays three graphs of the percentage CPU utilization:
• per second for the last minute, then
• per minute for the last hour, then
• per 30 minutes for the last 30 hours.
If this command is entered on the stack master, it will print graphs for all the stack
members. A stack member heading will be displayed to distinguish the different
graphs for every stack member.
Examples To display a graph showing the historical CPU utilization of the device, use the
command:
awplus# show cpu history
To display the CPU utilization history graph for stack member 2, use the command:
awplus# show 2 cpu history
where 2 is the node id of the stack member.
Parameter Description
<stack-ID> Stack member number, from 1 to 8.
To Next Page
Loading...
Need help?
General
