C613-50100-01 REV C Command Reference for x930 Series 264
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
SYSTEM CONFIGURATION AND MONITORING COMMANDS
SHOW
CPU
Related
Commands
show memory
show memory allocations
show memory history
show memory pools
show process
state Process state; one of “run”, “sleep”, “zombie”, and “dead”.
sleep% Percentage of time that the process is in the sleep state.
runtime The time that the process has been running for, measured in
jiffies. A jiffy is the duration of one tick of the system timer
interrupt.
Table 2: Parameters in the output of the show cpu command (cont.)
Parameter Description
To Next Page
Loading...
Need help?
General
