C613-50100-01 REV C Command Reference for x930 Series 965
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
OSPF COMMANDS
CAPABILITY
OPAQUE
capability opaque
Overview This command enables opaque-LSAs. Opaque-LSAs are Type 9, 10 and 11 LSAs that
deliver information used by external applications.
By default, opaque-LSAs are enabled.
Use the no variant of this command to disables opaque-LSAs.
Syntax
capability opaque
no capability opaque
Mode Router Configuration
Example
awplus# configure terminal
awplus(config)# router ospf 100
awplus(config-router)# no capability opaque
To Next Page
Loading...
