C613-50100-01 REV C Command Reference for x930 Series 2446
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
VIRTUAL CHASSIS STACKING (VCSTACK™) COMMANDS
SHOW
STACK RESILIENCYLINK
show stack resiliencylink
Overview Use this command to display information about the current status of the
resiliency-link across the members of the stack.
Syntax
show stack resiliencylink
Mode User Exec and Privileged Exec
Example To display information about the current status of the resiliency-link across the
stack members, use the command:
awplus# show stack resiliencylink
Output Figure 51-7: Example output from the show stack resiliencylink command
awplus(config)# show stack resiliencylink
Stack member 1:
-----------------------------------------------------------
Status Configured
Interface vlan4093
Interface state UP
Resiliency-link port(s) port1.0.11
Stack member 2:
-----------------------------------------------------------
Status Successful
Interface vlan4093
Interface state UP
Resiliency-link port(s) port2.0.11
To Next Page
Loading...
Need help?
General
