C613-50100-01 REV C Command Reference for x930 Series 895
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
RIP COMMANDS
MAXIMUM
-PREFIX
maximum-prefix
Overview Use this command to configure the maximum number of RIP routes stored in the
routing table.
Use the no variant of this command to disable all limiting of the number of RIP
routes stored in the routing table.
Syntax
maximum-prefix <maxprefix> [<threshold>]
no maximum-prefix
Mode Router Configuration
Example To configure the maximum number of RIP routes to 150, use the following
command:
awplus# configure terminal
awplus(config)# router rip
awplus(config-router)# maximum-prefix 150
Parameter Description
<maxprefix> <1-65535> The maximum number of RIP routes allowed.
<threshold> <1-100> Percentage of maximum routes to generate a warning. The
default threshold is 75%.
To Next Page
Loading...
Need help?
General
