43
C613-50100-01 REV C Command Reference for x930 Series 2091
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Authentication
Commands
Introduction
Overview This chapter provides an alphabetical reference for authentication commands. For
more information, see the AAA and Port Authentication Feature Overview and
Configuration Guide.
Command List •“auth auth-fail vlan” on page 2094
•“auth critical” on page 2096
•“auth dynamic-vlan-creation” on page 2097
•“auth guest-vlan” on page 2100
•“auth guest-vlan forward” on page 2103
•“auth host-mode” on page 2105
•“auth log” on page 2107
•“auth max-supplicant” on page 2109
•“auth profile (Global Configuration)” on page 2111
•“auth profile (Interface Configuration)” on page 2112
•“auth reauthentication” on page 2113
•“auth roaming disconnected” on page 2114
•“auth roaming enable” on page 2116
•“auth supplicant-ip” on page 2118
•“auth supplicant-mac” on page 2120
•“auth timeout connect-timeout” on page 2123
•“auth timeout quiet-period” on page 2125
•“auth timeout reauth-period” on page 2126
•“auth timeout server-timeout” on page 2128