Allied Telesis AlliedWare Plus - Spanning-Tree Mst Configuration

C613-50100-01 REV C Command Reference for x930 Series 614
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
SPANNING TREE COMMANDS
SPANNING
-TREE MST CONFIGURATION
spanning-tree mst configuration
Overview Use this command to enter the MST Configuration mode to configure the Multiple
Spanning-Tree Protocol.
Syntax
spanning-tree mst configuration
Mode Global Configuration
Examples The following example uses this command to enter MST Configuration mode. Note
the change in the command prompt.
awplus# configure terminal
awplus(config)# spanning-tree mst configuration
awplus(config-mst)#