Allied Telesis AlliedWare Plus - Show Port-Vlan-Forwarding-Priority

C613-50100-01 REV C Command Reference for x930 Series 518
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
VLAN COMMANDS
SHOW
PORT-VLAN-FORWARDING-PRIORITY
show port-vlan-forwarding-priority
Overview Use this command to display the highest priority protocol that controls port-vlan
forwarding or blocking traffic. This command displays whether EPSR or Loop
Protection is set as the highest priority for determining whether a port forwards a
VLAN, as set by the port-vlan-forwarding-priority command.
For more information about EPSR, see the EPSR Feature Overview and
Configuration Guide.
Syntax
show port-vlan-forwarding-priority
Mode Privileged Exec
Example To display the highest priority protocol, use the command:
awplus# show port-vlan-forwarding-priority
Output Figure 15-1: Example output from the show port-vlan-forwarding-priority
command
Related
Commands
port-vlan-forwarding-priority
Port-vlan Forwarding Priority: EPSR