C613-50100-01 REV C Command Reference for x930 Series 1187
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
BGP AND BGP4+ COMMANDS
BGP
FAST-EXTERNAL-FAILOVER
bgp fast-external-failover
Overview Use this command to reset a BGP session immediately if the interface used for BGP
connection goes down.
Use the no variant of this command to disable this feature.
Syntax
bgp fast-external-failover
no bgp fast-external-failover
Default Enabled
Mode Router Configuration
Example
awplus# configure terminal
awplus(config)# router bgp 100
awplus(config-router)# bgp fast-external-failover