C613-50100-01 REV C Command Reference for x930 Series 892
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
RIP COMMANDS
KEY
key
Overview Use this command to manage, add and delete authentication keys in a key-chain.
Use the no variant of this command to delete the authentication key.
Syntax
key <keyid>
no key <keyid>
Mode Keychain Configuration
Usage This command allows you to enter the keychain-key mode where a password can
be set for the key.
Example The following example configures a key number 1 and shows the change into a
keychain- key command mode prompt.
awplus# configure terminal
awplus(config)# key chain mychain
awplus(config-keychain)# key 1
awplus(config-keychain-key)#
Related
Commands
key chain
key-string
accept-lifetime
send-lifetime
Parameter Description
<keyid> <0-2147483647> Key identifier number.
To Next Page
Loading...
Need help?
General
