Allied Telesis AlliedWare Plus User Manual

C613-50100-01 REV C Command Reference for x930 Series 2392
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
DHCP SNOOPING COMMANDS
SHOW
IP DHCP SNOOPING
show ip dhcp snooping
Overview Use this command to display DHCP snooping global configuration on the switch.
Syntax
show ip dhcp snooping
Mode User Exec and Privileged Exec
Example To display global DHCP snooping configuration on the switch, use the command:
awplus# show ip dhcp snooping
Related
Commands
service dhcp-snooping
show arp security
show ip dhcp snooping acl
show ip dhcp snooping agent-option
show ip dhcp snooping binding
show ip dhcp snooping interface
Table 10: Example output from the show ip dhcp snooping command
DHCP Snooping Information:
DHCP Snooping service ............. Enabled

Option 82 insertion ............... Enabled

Option 82 on untrusted ports ...... Not allowed
Binding delete by client .......... Disabled
Binding delete by link down ....... Disabled
Verify MAC address ................ Disabled
SNMP DHCP Snooping trap ........... Disabled

DHCP Snooping database:
Database location ................. nvs Number of entries in
database ..... 2

DHCP Snooping VLANs:
Total VLANs enabled ............... 1
Total VLANs disabled .............. 9
vlan1 .............. Enabled
vlan2 .............. Disabled
vlan3 .............. Disabled
vlan4 .............. Disabled
vlan5 .............. Disabled
vlan100 ............ Disabled
vlan101 ............ Disabled
vlan105 ............ Disabled
vlan1000 ........... Disabled
vlan1001 ........... Disabled

Allied Telesis AlliedWare Plus Specifications

General

Brand	Allied Telesis
Model	AlliedWare Plus
Category	Switch
Language	English